Lorsque coupé avec des ciseaux ou un couteau, le ruban double-face est très difficile à dégager de son film protecteur arrière (flèche). Cela vous rappelle quelque chose ?
When cut with shears or a knife, the double-sided tape is very difficult to separate from its back protection strip (arrow). Does it tell remind you something ?
Il est de beaucoup préférable de déchirer le ruban (cercles) ce qui produit une texture inégale qui améliore la prise. Essayez !
It is much preferable to tear off the tape (circles) what produces uneven texture that improve the grip. Try it !
Inscrivez-vous gratuitement en haut à droite et…
Soyez toujours prudent et bon bricolage !
Register for free at the upper right and…
Always be careful and Happy Woodworking !
Advertisements
I’ve worked extensively with DF tape for over 30 years. You might try picking at the corner of the liner layer with a very sharp pointy x-acto blade. Works for me.
Also, the really good stuff can’t be torn with fingers. It must be cut with scissors or knife.
Joe, Even with a very sharp x-acto I find it very difficult. The best stuff I own is 2″ wide fabric turner’s tape and I can tear it, with a bit of effort I must say. Thanks for sharing your own experience.
Best,
If when you try to remove the backing like you do just proves to me the tape is a superior tape and just what I’m looking for. When you tear the tape it sometimes twists it up and it will not lay flat.
Cheers
Nel, A good thing would be trying it at the store !! 🙂
Best,