Mobile Computer Desk / Support mobile pour ordinateur

Bien pensé et fabriqué en une journée, j’ai travaillé ce support sans plan et je l’ai imaginé progressivement avec les rebuts que j’avais sous la main dans l’atelier.

Well thought and fabricated in one day, I made this desk without plan and I designed it progressively according to the scraps I had on hand in the shop.

____________________________________________________________

____________________________________________________________

Dessus 24’’ X 16’’ (29’’ du plancher)

Top 24’’ X 16’’ (29’’ above the floor)

____________________________________________________________

Côtés 12’’ X 25’’

Sides 12’’ X 25’’

____________________________________________________________

Tablette pour clavier 8’’ X 22’’ (25-1/2’’ du plancher)

Keyboard shelf 8’’ X 22’’ (25-1/2’’ above the floor)

____________________________________________________________

Supports pour tablette du clavier 3’’ X 19’’

Keyboard shelf support 3’’ X 19’’

____________________________________________________________

____________________________________________________________

Tablette pour imprimante 12’’ X 21-3/4’’ (20-1/2’’ du plancher)

Printer shelf 12’’ X 21-3/4’’ (20-1/2’’ above the floor)

____________________________________________________________

___________________________________________________________

Traverse arrière (longeron) 3-1/2’’ X 22’’

Back stretcher (stringer) 3-1/2’’ X 22’’

___________________________________________________________

Pieds 2-1/2’’ X 16’’

Feet 2-1/2’’ X 16’’

 

La longeur des deux petites pattes avant a été déterminée par la hauteur des roulettes – voyez ce truc pour la hauteur des roulettes.

The length of the two front short legs has been determined by the height of the casters –  watch this tip to measure the height of the casters.

4 Responses to Mobile Computer Desk / Support mobile pour ordinateur

  1. Holger Herrmann says:

    This is EXCELLENT. A very useful addition to any shop or even in a small room. The supplies are also easy, most of us have enough leftover wood to create this project with little or no cost at all. Thank you.
    Cheers
    Holger

    • Thank you Holger for your comments.

      Few modifications to its simple design and this support can be adapted to many needs or uses, and fit almost anywhere.

      Best,

      Serge

  2. lelobo says:

    Hi, Many of us have a tendency to collect scraps and not use them in good time, this creates a lack of space and sometimes even more work as we are more likely to move the pieces from place to place.

    The idea you had to make a really useful piece with these scraps and therefore liberate the shop space at the same time is great. We need to consider this as often as possible. The benefits you have demonstrated are examples of keeping the mind well exercised also.

    Great Job!
    RR.